Digital Water Pavilion

18 October, 2017   /   Posted by Lumiartecnia

The DWP was the first building of Milla Digital, inaugurated during the Expo Zaragoza 2008. This is the first building ever built whose external facades are fully integrated by digital water curtains. These curtains are digitally controlled and have integrated sensors, to achieve dynamic openings.

Through an interface, the user can create interactive sequences in the curtains, drawing shapes, writing letters or varied patterns . The interactivity with the user is total, and it is therefore a building that is at the same time, a large public space connectivity, and a differential equipment.

The roof of the building is a high-tech mobile structure, which can go up to 4 m and fall flat to the ground, leaving at visible at sight only the two crystal buildings in the middle of the pavilion.

The “water walls” that make up the structure consist of a row of closely spaced solenoid valves along a pipe suspended in the air. The valves can be opened and closed, at high frequency, via computer control. This produces a curtain of falling water with gaps at specified locations; a pattern of pixels created from air and water. The entire surface becomes a one-bit-deep digital display that continuously scrolls downward.

All of the walls of the pavilion are made of Digital Water, with vertical partitions, both on the edge of the roof and inside it. The pavilion roof, covered by a thin layer of water, is supported by large pistons and can move up and down. When there is too much wind, the roof lowers. Similarly, when the pavilion is closed, the whole roof collapses to the ground and the whole structure will disappear.

“Water, actuated by gravity, has traditionally been the most dynamic element in architectural and urban space,” said William J. Mitchell, head of MIT’s Design Laboratory and former Dean of Architecture at MIT. “For centuries, architects have shaped and directed it by means of channels and pipes, nozzles, and valves. The industrial era brought powerful pumps, which enabled larger-scale water elements, such as jets that spurted high into the air.

“Now, in the digital electronic era, new combinations of sensor technology, embedded intelligence, networking, computer-controlled pumps and valves, and control software open up the exciting possibility of urban-scale, precisely controlled, highly interactive water.”

The facade of the water pavilion is like a very large display, with text, letters, and interactive patterns. “You could throw a ball at the wall, and then see an open circle drop down to meet it precisely where and when its trajectory intersected the water surface. And, with suitable programming, touching the water surface at any point can propagate patterns horizontally, along the wall, to other locations,” Mitchell explains.

Equipped with suitable sensors, Water Walls can detect the approach of people and, “like the Red Sea for Moses, open up to allow passage through at any point,” said Mitchell. “This provocatively subverts the fundamental architectural conception of an opening as something, like a door, found at a fixed location.”

The Pavilion illustrates the potential of “Digital Water” as an emerging medium. While there have been prior attempts to digitally control water droplets, this is the first time that the idea is used to create an architectural space. Since plumbing and electronics are not inherently expensive and recycled water is plentiful and cheap, water walls could conceivably be created on a large scale.

“The dream of digital architecture has always been to create buildings that are responsive and reconfigurable,” said Carlo Ratti, DWP architect. “Think about spaces that can expand or shrink based on necessity and use. It is not easy to achieve such effects when dealing with concrete, bricks and mortar. But this becomes possible with digital water, which can appear and disappear.”

Ratti added: “In the Nineties, digital technology led us to fantasize about distant virtual worlds. Today we have moved on: the future of architecture might deal with digitally augmented environments, where bits and atoms seamlessly merge.”

The digital water wall concept was initially developed in the Zaragoza Digital Mile class at MIT, led by William Mitchell and Dennis Frenchman, with Michael Joroff and Carlo Ratti. The Water Engineering was developed by Lumiartecnia Internacional. DWP construction was carried out by Siemens. The design of the Digital Water Pavilion was carried out by Walter Nicolino, Carlo Ratti, Claudio Bonicco and Matteo Lai at the architecture office carlorattiassociati (Turin, Italy); the engineering company Arup (London, UK and Madrid, Spain); and landscape architects Agence Ter (Paris, France).

More information and full credits can be found at

* Texts courtesy of MIT news :